EasyManua.ls Logo

Whirlpool AD35USS - Removing the Dehumidifier Cabinet; Cabinet Removal Procedure

Whirlpool AD35USS
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3-2
REMOVING THE CABINET
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug dehumidifier or disconnect power.
2. Pull the water bucket out of the dehumidi-
fier and remove it.
3. If present, pull the air filter down and out
from behind the front louvers.
4. Remove the two front screws from the
front half of the cabinet.
Water Bucket
Front Screws
5. Remove the screw from the left and right
side of the cabinet.
Left Side Screw
Air
Filter

Related product manuals