6
3. Dry Function should be kept at least 50cm
from the unit.
Leave an appropriate
gap as above.
Fit bucket properly. Improper
fitting or full bucket causes
”FULL” to illuminate and stops
the unit.
Do not insert small
objects, that could
cause damage and danger.
Do not remove bucket
during operation - this
could cause dripping.
min. 50cm
Do not insert small
objects, that could cause
damage and danger.
2. Position at a safe distance from walls and
furniture (see diagram below).
1.
Place unright on a stable, flat surface to prevent leakage.
min 20cm away
from the front
min 20cm away
from the back
min 20cm away
from left&right
To Next Page
Loading...
