To Next PageTo Next Page
Need help?Do you have a question about the Whirlpool LAVAVAJILLAS ADP 2554 WHM and is the answer not in the manual?
General| Color | White |
|---|---|
| Number of programs | 6 |
| Energy efficiency class | A |
| Washing class | A |
| Drying class | A |
| Number of place settings | 12 |
| Delay start | Yes |
| Half load | Yes |
Comprehensive technical specifications, dimensions, and operational data of the appliance.
Detailed list of replacement parts with their corresponding 12NC codes and descriptions.
Visual diagrams showing the assembly of appliance components with reference numbers.
Schematic illustrating the appliance's electrical connections and component layout.
Diagram detailing the washing machine's program logic, functions, and timings.
Explanations of text, fault codes, and procedures for service test programs.
Physical dimensions, weight, electronic modules, and program sequence indicators.
Water volumes per cycle, detergent/rinse aid capacities, softener details, and pressure.
Motor speeds, water flow rates for various components like pumps and spray arms.
Water flow rates, voltage, frequency, power consumption, and fuse ratings.
Details on wash/drain pumps, heating element, thermostat, and regeneration potentiometers.
Resistances for various solenoid valves and the NTC temperature sensor.
Water softener regeneration levels corresponding to different water hardness degrees.
Components related to the door mechanism, baskets, and internal structural elements.
Parts for water supply, drainage, and pumping systems, including valves.
Electronic control module, sensors, and wiring harness components.
Various hoses, seals, and connecting elements for water and component interfaces.
Screws, clips, and other small hardware used in appliance assembly.
Diagram showing the assembly of major internal and external appliance parts.
Diagram illustrating the assembly of the door panel and control console.
Detailed diagram of all electrical connections, components, and their labels.
Chart detailing program steps, timings, and component activation states.
Steps for initiating and running the passive and active service test programs.
Explanations and troubleshooting steps for specific fault codes.
Explanations and troubleshooting steps for additional fault codes.
Summary table correlating fault codes with LED error signal patterns.
Step-by-step guide for initiating and performing the passive test program.
Detailed procedure for running the active test program and fault detection.
