40
Setting of sterilization function
Example: To disinfect tableware
Steps:
1. In standby mode, press the 【>】button to the sterilization icon“ ”, which will flash. Press the【 】
button to confirm.
2. Press the 【 】button twice to start this function.
3. The sterilization function is set successfully.
Setting of defrost function
Example: 15 minutes of defrosting.
Steps:
1. In standby mode, press the 【>】button to the defrost icon“ ”, which will flash. Press the【 】
button to confirm.
2. Press the【>】button to reflect 00:15. Press the【 】button to confirm.
3. Press the【 】button again.
4. The defrost function is set successfully.
To Next Page
Loading...