Whirlpool MAX-209S - ERROR CODE DESCRIPTION

47
ERROR CODE DESCRIPTION
CODE
EXPLANATIONS
POSSIBLE REASONS
ER1
Cavity high temperature protection.
Temperature in cavity exceeds safety setting.
ER2
Steam plate high temperature protection.
Temperature of steam plate exceeds safety setting.
ER3
Cavity low temperature protection.
Continue working for 3 minutes but temperature of cavity
is lower than 30
O
C.
ER4
Steam plate low temperature protection.
Continue working for 3 minutes but temperature of cavity
is lower than 30
O
C.
ER5
Sensor connection failure.
Sensor connection failure, causing of open circuit.
ER6
Sensor sense failure.
Sensor sense failure, causing of short circuit.
Whirlpool Hong Kong Ltd.
17/F., Elite Centre,
22 Hung To Road
Kwun Tong, Kowloon, H.K.