Whirlpool MAX-209S - TROUBLE SHOOTING GUIDE; PROBLEM DIAGNOSE

46
D. TROUBLE SHOOTING GUIDE
PROBLEM DIAGNOSE
Problem
Cause
Solution
1
Nothing appears on the display
screen
Oven is not connected to the power supply
Connect to power supply
Power cords fail to work
Contact after-sales service
2
Oven fails to work
Power supply plug is not in proper position
Plug in the power supply
again
Oven door is not closed properly
Close the oven door again
Water tank in not in proper position
Reposition the water tank
Circuit board is damaged
Seek for repair service
Child lock is locked
Unlock the child lock
3
Display is not working normally
Display screen is damaged
Contact after-sales service
Parts in circuit board are damaged
4
Water or steam leaks out during
cooking
Oven door is not closed tightly
Close the oven door tightly
again
Sealing ring on door is damaged
Contact after-sales service
5
Oven lamp fails to light
Lamp is damaged
Replace lamp
Master C.P.B is damaged
Contact after-sales service
6
Fan motor fails to work
Motor is damaged
Contact after-sales service
Master C.P.B is damaged
7
Buttons fail to work
Conductive rubber buttons are damaged
Contact after-sales service
Master C.P.B is damaged
8
No steam is produced
Water tube is folded, stuffed or damaged
Contact after-sales service
Water pump is damaged
Pouring system is not sealed well
9
Water leaking from the oven
Water tank did not insert into the oven
completely