Whirlpool RF3020XP - Cleaning Chart; If You Need Service or Assistance

Cleaning Chart
PART
Exterior
surfaces
Surface units
WHAT TO CLEAN
HOW TO CLEAN
Soft cloth and warm soapy l Wipe off regularly when cooktop and
water
lower oven are cool
Nylon or plastic scouring
l Do not allow food containing acids
pad for stubborn spots
(such as vinegar, tomato, lemon
juice or milk) to remain on surface.
Acids will remove the glossy finish.
l Do not use abrasive or harsh
cleansers.
-
No cleaning required
l Spatfers or spills WIII burn off
l Do not immerse in water.
Chrome Automatic dlshwasher or
l Wash with other cooking utensils
retlector bowls warm, soapy water and
l Clean frequently
plastic scrubbing pad
l Do not use abmsive or harsh
cleansers.
Broiler pan
Warm, soapy water or
and grid
steel-wool pad
l Wash with other cooking utensils
Control knobs
Warm, soapy water and l Wash, rinse and dry well
soft cloth. l Do not soak.
Control panel
Warm, soapy water or
spray glass cleaner
l Wash, rinse and dry well
l Follow directIons provided with
cleaner
Oven racks
Warm, soapy waler or
soapy steel-wool pads
l Wash, rinse and dry Use soapy steel
wool pads for stubborn areas
Oven door
glass
Spray glass cleaner;
Warm, soapy water or
plastic scrubbing pad
l Make sure oven is cool.
l Follow directlons provided with
cleaner
l Wash, rinse and dry well with a soft
cloth.
Standard
oven
Warm, soapy water or
l Remove door for easier access
soapy steel-wool pad l Place newspaper on floor to protect
Commercial oven cleaners. floor surface.
l Follow directions provided with the
oven cleaner.
l Rinse well with clear water
l Use in well ventilated room
l Do not allow commercial oven
cleaner to contact the heating ele-
ments, oven seal, or exterior surfaces
01 the mnge. Damage will occur.
If you need service or assistance,
we suggest you follow these five steps:
1. Before calling for
assistance...
Performance problems often result
from Ilitle things you can find and fix your-
self without tools of any kind.
14
If nothlng opemtes:
l Is the powersupply cord plugged into a
live circuit with the proper voltage?
(See “Installation Instructions:‘)
l Have you checked your home’s main
fuses or circuit breaker box?