Caring for Your Range
Your range is designed for easy care.
You can do most cleaning with items found
around your home. Cleaning your range
whenever spills or soiling occurs will help
to keep it looking and operating like new.
Electrical Shock Hazard
Make sure all controls are OFF and the
range is cool before cleaning.
I
Failure to do so could result in electrical
shock or burns.
Surface units and reflector bowls
Removing
\$
P
1. Make sure
all surface units are off and
cool before removing surface units and
reflector bowls.
2.
Lift
the edge of the unit, opposite the
receptacle, just enough to clear the
element hold-down clip and the reflector
bowl.
3. Pull
the surface unit straight away from
the receptacle.
4.
Lift out
the reflector bowl. See “Cleaning
chart” on page 26 for cleaning instructions.
23
To Next Page
Loading...