Troubleshooting
Most cooking problems often are caused by little things you can find and fix without tools of
any kind. Check the lists below and on the next page before calling for assistance or service.
If you still need help, see “Requesting Assistance or Service” on page 31.
If nothing operates, check the following:
Is the range plugged into a live outlet with the proper voltage?
(See Installation Instructions.)
Have you blown a household fuse or tripped a circuit breaker?
Other possible problems and their causes:
PROBLEM CAUSE
The oven will not
operate
l
You have not set the electronic control correctly. Refer to
the section in this manual describing the function you are
operating.
The surface units
will not operate
l
You have blown a household fuse or tripped a circuit
breaker.
l
The surface units are not plugged in all the way.
(See “Replacing” on page 24.)
l
You have not set the control knobs correctly. Push control
knobs in before turning to a setting.
Control knob(s)
will not turn
l
You are not pushing in before turning.
continued on next page
29
To Next Page
Loading...
