OVEN TEMPERATURE
OVEN SIGNAL
OVEN
CONTROL
LIGHT
SELECTOR
I
LOCK
\
CLEAN
RIGHT REAR
/
RIGHT FRONT
\
LIGHT LIGHT
CONTROL KNOB
CONTROL KNOB
Using the surface units
Surface Unit Indicators
The solid dot in the surface unit
indicator shows which surface unit
is turned on by that knob.
Signal light
One of the signal lights will glow
when a surface unit is on.
Control knobs must be pushed in
before turning
them to a setting. They
can be set anywhere between HI
and OFF.
Until you get used to the settings, use the
start cooking at the high settings; then turn
following as a gulde.
For best results,
the control knob down to Continue
cooking.
Use HI
to start
Use MED-HI
Use MED
Use MED-LO
foods cook-
to hold a
for gravy,
to keep food
ing; to bring
rapid boil; to puddings
cooking after
liquids to a
fry chicken
and icing; to
starting it
boil.
or pancakes.
cook large
on a higher
amounts of
setting.
vegetables.
CAUTION: The use of the HI setting for long periods of time
can damage surface units and discolor chrome reflector
bowls. Start cooking on HI and turn control down to con-
tinue cooking.
Use LO
to
keep food
warm until
ready to
serve. Set the
heat higher
or lower
1
within the LO
band to keep
food at the
temperature
you want.
To Next Page
Loading...
