EasyManua.ls Logo

Whirlpool RF366PXY - Broiling Function Operation

Whirlpool RF366PXY
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- Position the rack before turning the oven
on. See “Broiling rack position chart” on
page 15.
: Put the broiler pan and food on the rack.
: . Close the door to the Broil Stop position
(open about 4 inches [lo.2 cm]). The
door will stay open by itself.
4. Set the Oven Selector and Oven Tem-
perature Control Knob to BROIL. The
OVEN HEATING Indicator Light will
come on.
NOTE: Do not preheat oven when
broiling.
5. When broiling is done, turn both the
Oven Selector and Oven Temperature
Control Knob to OFF. The OVEN HEAT-
ING Indicator Light will go off.
Custom broil
l If food is cooking too fast, turn the Oven
Temperature Control Knob counterclock-
wise until the OVEN HEATING Indicator
Light goes off.
l If you want the food to broil slower from
the start, set the Oven Temperature Control
Knob between 170°F and 325°F (77°C and
163°C). These temperature settings allow the
broil heating element to cycle and to slow
cooking. The lower the temperature, the
slower the cooking.
l Fish and chicken are some foods that may
cook better if you use lower broiling tempera-
tures.
The Oven Selector must be on BROIL for
all broiling temperatures.
NOTE: Leave the oven door partly open
whenever using the oven to broil. This allows
the oven to maintain proper temperatures.
14

Related product manuals