PAGE 4
FOR SERVICE TECHNICIAN’S USE ONLY
DO NOT REMOVE OR DESTROY
KENMORE WASHER CONTROL PANEL
Figure 1c - User Interface Test, Kenmore Washer
Pressing the
Cycle Select button
turns on/off each
corresponding
cycle indicator.
Pressing the Power
button exits the
UI/LED Test Mode.
Pressing the Start/Pause
button begins or continues the
test. Press once to turn off
the indicator.
Pressing the
Wash Temp button
turns on/off each
corresponding
temperature
indicator.
Pressing the “+” button
turns on/off the 7-segment display.
Pressing the “–” button
turns on/off the control lock
and lid lock indicators.
To Next Page
Loading...
