EasyManua.ls Logo

Whirlpool washing machine - DRAINING RESIDUAL WATER; Residual Water Drainage Process; APPLIANCE CARE AND MAINTENANCE; Cleaning Exterior and Control Panel

Whirlpool washing machine
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26
DRAINING RESIDUAL WATER
CARE AND MAINTENANCE
Appliance exterior and control panel
Can be washed down with a soft, damp cloth
A little neutral cleaner (not abrasive) can be
used
Dry with a soft cloth
Door seal
Clean with a damp cloth when necessary
Check the seal folds for foreign bodies
periodically
Filter
We recommend that you check and clean the
filter regularly, at least two or three times a year
(see “Removing The Filter”)
Before emptying the residual water, switch the appliance off and unplug it from the
mains socket.
Open the cover to the foreign body trap. Open the filter cover with the help of the
coloured insert from the detergent container. Place a container beneath it.
1.
Open the filter but do not withdraw it completely. Slowly turn the handle anticlockwise until the
water drains out.
2.
Wait until all the water has drained off.
3.
Now unscrew the filter completely and remove it.
4.
Tilt the appliance forwards carefully to allow the water to flow out.
5.
Insert the filter with the guide pin upwards and screw it in clockwise to the stop (handle horizontal).
6.
Fold the cover up and lock it.
Before using the washing machine again:
1.
Pour approx. 1 litre of water into the detergent drawer to reactivate the Eco system.
2.
Reinsert the plug in the socket.

Other manuals for Whirlpool washing machine

Related product manuals