To Next PageTo Next PageWhy are there stains on clothes after using my Whirlpool WHD5090GW0 Dryer?
If your Whirlpool Dryer has stains on the load, it may be due to improper use of fabric softener. Add dryer fabric softener sheets at the beginning of the cycle. Adding them to a partially dried load can stain garments. Also, do not use fabric softener sheets with steam cycles.
Why is the cycle time too short on my Whirlpool WHD5090GW0 Dryer?
If your Whirlpool Dryer cycle time is too short, ensure the dryer is level, so the load contacts the sensor strips on Automatic Cycles. You can also adjust the dryness level setting on Automatic Cycles to increase drying time. If loads consistently end too early, further adjustments may be needed.
Why is my Whirlpool Dryer so loud?
If your Whirlpool Dryer is producing a loud humming or increased noise during the cycle, it might be because the load is packed too tightly. Reduce the load size to the recommended amount and run the dryer for 5–10 minutes.
Why is there water in or around my Whirlpool Dryer?
If you find water in the bottom filter or on the floor near your Whirlpool Dryer, ensure the dryer is level. Also, make sure the bottom filter is correctly seated. Verify that the drain hose is not longer than what was provided and is installed no higher than 36" (91 cm) from the dryer's bottom.
What does error code F10 mean on my Whirlpool WHD5090GW0 Dryer?
If your Whirlpool Dryer displays error codes F10 to F24, turn off and unplug the dryer. After about half an hour, plug it back in and restart the cycle. If the problem continues, call for service.
General| Brand | Whirlpool |
|---|---|
| Model Number | WHD5090GW0 |
| Product Type | Dryer |
| Fuel Type | Electric |
| Color | White |
| Number of Options | 5 |
| Wrinkle Shield Option | Yes |
| Moisture Sensor | Yes |
| Voltage | 240 V |
| Amperage | 30 A |
| Energy Star Certified | No |
| Temperature Settings | 4 |
| Control Type | Electronic |
Explains safety alert symbols, DANGER, WARNING, and fire hazard precautions.
Details optional accessories like Stack Kit and Pedestal for enhanced functionality.
Explains the energy efficiency, performance, and unique sounds of the heat pump system.
Describes buttons, controls, display indicators, and available options for operating the dryer.
Details automatic cycles, load size recommendations, dryness levels, and options for fabric care.
Explains timed cycles, air dry, and the refresh cycle for specific laundry needs.
Covers essential steps like loading, starting cycles, selecting options, and adapting to water conductivity.
Instructions for cleaning the dryer location, lint screen, interior, bottom filter, and storage.
Covers tools, location, spacing, dimensions, and drain system installation for proper setup.
Details electrical requirements, grounding, and connection types for USA installations.
Covers Canadian electrical requirements, including grounding and connection types.
Step-by-step guides for connecting power supply cords and direct wire installations.
Instructions for leveling the dryer and a checklist to ensure all installation steps are completed.
Step-by-step guide for reversing the dryer door for left or right opening.
Solutions for common operation, noise, drying result issues, and explanations of display error codes.
Details the limited warranty coverage, exclusions, and how to contact for service or parts.
Information on how to order genuine Whirlpool replacement parts and accessories.
