W
leakage
For more detailed information about treatment, recovery and recycling of this product, please
contact your local city office, your household waste disposal service or the shop where you
purchased the product.
PF error indicates any power failure while "Delay Wash"
feature is in use.
Ensure that the lid is closed.
218
Level the Washer
Connect the inlet hose to Machine
Connect the inlet hose to tap
are
R
Remove the inlet valve cap.
If Ub is displayed
and pre
into
the wash process to balance the laundry load. If off-balance
persists, the user will be alerted.
This is just for the user’s information and will not impact
the wash process.
Ensure that you have checked the above points before calling the Whirlpool Service Centre.
to prevent
.
s
manufacturing
c t.
.
Trouble Shooting
To Next Page
Loading...
