7, Select SOIL LEVEL
SOiL LEVEL
Heavy O
Med
Light o
Ex Light
9, Select cycle options, if desired
RINSE OPTIONS
PRESOAK
O 1 Rinse O Off
o 2 Rinses O_n
O1 Rinse
with
softener
) 2 Rinses
with
softener
Once you select a cycle, select the desire soil level by turning
the Soil Level knob to the desired setting.
If you would like to add an extra rinse, fabric softener or
extra soak period to any cycle, turn the knob to desired
setting.
8, Select WASH TEMP
WASH TEMP
Hot 0
Warm o
Cool 0
Cold
Tap Cold O
Once you select a cycle, select the desired wash temperature
by turning the Wash Temp knob to the desired setting.
Always read and follow fabric care label instructions to avoid
damage to your garments.
: Hot
: Some cold water is added to save Whites and pastels
ii
: energy. This will be cooler than Durable garments
Warm
Some cold water will be added, so Bright colors
this will be cooler than what your
_i Moderate to light soils
previous
washer
provided.
Cool
Warm water is added to assist in Colors that bleed
soil removal and to help dissolve or fade
detergents. Light soils
Cold
Warm water may be added to Dark colors that
assist in soil removal and to help bleed or fade
dissolve detergents. Light soils
Tap Cold
This is the temperature from your Dark colors that
faucet, bleed or fade
Light soils
10, Press START/Pause
to begin wash cycle
Start / Pause
Hold 3 Seconds
to Cancel
Press the START/Pause button to start the wash cycle. When
the cycle has finished, the DONE indicator will light. Promptly
remove garments after cycle has completed to avoid odor,
reduce wrinkling, and rusting of metal hooks, zippers, and
snaps.
Unlocking the lid to add garments
If you need to open the lid to add 1 or 2 missed garments:
Press START/Pause; the lid will unlock once the washer
movement has stopped. This may take several minutes if the
load was spinning at high speed. Then close lid and press
START/Pause again to restart the cycle.
If lid is left open for more than 10 minutes the water will pump
out automatically.
To Next Page
Loading...
