TEARDOWN SECTION
This section will describe how to remove components from a top load washer.
Unless stated, the procedure will be the same on all top load washers, Unless stated,
reverse the procedure to reinstall the component.
Warning: Always remove electrical power from the washer when working in an
area where electrical power is present.
Removing the washer lid
Open the washer lid, move the hinge shaft on the asher lid with slotted screwdriver,
then remove the washer lid.
Removing the Lid Handle
Open the washer lid，use cross-style screwdriver to demount the two screws fixed on
the Lid Handle.
To Next Page
Loading...
Need help?
General