Whirlpool WWDC9614 - Initial Machine Setup; Initial Setup First Cycle

2
DETERGENT DISPENSER
See the section DAILY USE for instructions on selecting and starting a
programme.
First cycle operation
Remove any manufacturing debris:
1 . Select the “Cotton” programme with a temperature setting of 90 °C.
2 . Pour a small quantity of detergent powder into the main wash
compartment of the detergent dispenser (maximum 1/3 of the
quantity the detergent manufacturer recommends for lightly soiled
laundry).
3 . Start the programme without loading the washer dryer machine
(with empty drum).
FIRST TIME USE
B
A
Prewash Compartment
•  Detergent for prewash
Main Wash Compartment
•  Detergent for the main wash
•  Stain remover
•  Water softener
Softener compartment
•  Softener
•  Liquid starch
Pour softener or starch solution into the
compartment without exceeding the “max” level.
Release button
(press to remove tray for cleaning).
Preferably use the partition A when
washing with a liquid detergent for
washing, to ensure that the correct
quantity of detergent is used (the
partition is included in the bag
containing the instructions).
Move the partition into slot B when
using detergent powder.