Whistler D11VR User Manual

OPERATIONS
7
Power Connection in Vehicle
1. Plug the USB end of the vehicle power cord into the USB
jack of the DVR.
2. Insert the other end of the power cord into the vehicle’s
lighter socket/power port.
NOTE: Unit will automatically turn on and start recording
when power is applied. It will turn o when power is removed.
Power ON/OFF
Power On: Press
to turn on DVR. Blue Status LED illuminates.
Power O: Press and hold until the Whistler screen appears.
NOTE: The D11VR will automatically power OFF after the
low battery warning is displayed.
LED Light On/O
LED On/O: With DVR turned on, press
button. Press
again to turn o.
STEP 1
STEP 2

Whistler D11VR Specifications

General

Brand	Whistler
Model	D11VR
Category	Dash Cameras
Language	English