Whistler D24RS User Manual

9
DEVICE FUNCTIONS
Powering up Camera
Plug the micro USB end of the power cord supplied
into the micro USB jack of the camera. Insert the
other end of the power cord into the vehicle's 12
Volt power port. Unit will automatically turn on and
start recording when power is applied. Unit will
automatically turn off when power is removed.
NOTE: This dash camera requires power from the
vehicle to operate. Without power the internal battery
will only power the camera for a few minutes.
Menu Button
When in standby mode, press the to view the
Video menu items. Then press the p or q to scroll
through menu items. Press OK to select highlighted
items.

Whistler D24RS Specifications

General

Brand	Whistler
Model	D24RS
Category	Dash Cameras
Language	English