5
SAME/FIPS Weather Alert – Displays weather events
for the county or counties that you choose.
Memory Backup – Keeps the frequencies stored in
memory for an extended time.
Scan Delay – Delays scanning for about 2 seconds, so
that you can hear replies on the same channel.
Priority Channel – Lets you set the scanner to check
one channel every 2 seconds so that you do not miss
transmissions on that channel.
Data Cloning – Lets you transfer the programmed data
to another WS1010 scanner.
Scanner Basics
After you familiarize yourself with your scanner’s
features you can then set up your scanner.
Frequencies
A frequency is the waveband of the transmitting signal
(expressed in kHz or MHz). Your WS1010 receives a
range of analog frequencies; the best resource for your
local frequencies is www.radioreference.com.
Also, you can use your scanner’s search functions to
find active frequencies in your area.
Your WS1010 scanner can receive these bands:
Frequency Range Types of Transmissions
29–54 MHz 10-Meter Ham, VHF Lo, 6-Meter
Ham
108–136.9875 MHz Aircraft
137–174 MHz Military Land Mobile, 2-Meter Ham,
VHF Hi
380 –512 MHz UHF Aircraft, Federal Government,
70-cm Ham, UHF Standard, UHF “T”
n Note: See “Specifications” on page 30 for more
information about frequency steps.
SCANNER BASICS
To Next Page
Loading...
Need help?
General
