Specifications
Number of Channels:
Input two
Output six
Frequency Range:
20 Hz – 20 kHz, ±0.5 dB
Maximum Operating Level:
+21 dBu
Input Gain:
15 dB in 1 dB increments using 4 position DIP switch.
Input Level indicators:
Front Panel:
Red (clip) and green (0 dB) LEDs.
Rear Panel:
Green (0 dB) LED.
Output Attenuation:
31 dB in 1 dB increments using 5 position DIP switch
Output Level indicators:
Front Panel:
Green (0 dB) and green (-l0 dB) LEDs.
Output Assignment:
Assigned from either input or sum of both using 2 levers on each output DIP switch.
Dynamic Range:
>114 dB.
Distortion:
Less than 0.01% into 600 ohms, 20Hz - 20kHz.
Crosstalk:
Less than -90 dB at 1 kHz.
Input Impedance:
30 kΩ balanced, l0 kΩ unbalanced.
Input Circuit:
Active servo-balanced. Can operate unbalanced with no gain change.
Output Impedance:
102 ohms balanced, 51 ohms unbalanced.
To Next Page
Loading...