White Rodgers 1F97-0671 User Manual (English)

Questions and Answers:

G
Glenda SchmidtJul 29, 2025
How to fix White Rodgers 1F97-0671 Thermostat with no heat, cool, or fan?
- J
  John JohnsonJul 29, 2025
  If your White Rodgers Thermostat isn't producing heat, cool air, or running the fan, here are a few things to check: * First, examine the fuse or circuit breaker and replace the fuse or reset the breaker if needed. * Next, make sure the furnace power switch is turned to the ON position. * Also, ensure the furnace blower compartment door or panel is correctly installed to engage the safety interlock or door switch. * Finally, check for and tighten any loose connections to the thermostat or system.
R
Rachel HowardAug 2, 2025
What to do if my White Rodgers 1F97-0671 Thermostat isn't heating?
- E
  eric83Aug 2, 2025
  If your White Rodgers Thermostat isn't producing heat, try the following: * First, check if the pilot light is lit and relight it if necessary. * If the heat works intermittently, it might be a furnace lock-out condition; in this case, contact the furnace manufacturer or a local HVAC service person for assistance. * If the thermostat doesn't click after being reset, contact your heating and cooling service person or place of purchase for a replacement, as the heating system may require service or the thermostat may need to be replaced.
T
Tiffany DavidAug 6, 2025
What to do if my White Rodgers 1F97-0671 Thermostat isn't cooling?
- B
  brian08Aug 6, 2025
  If your White Rodgers Thermostat isn't cooling, it could mean that the cooling system requires service or the thermostat needs replacement. The diagnostic steps are the same as for a 'No Heat' condition, but remember to set the thermostat to COOL and lower the setpoint below the room temperature.
R
Ronald YoungAug 11, 2025
Why does my White Rodgers 1F97-0671 Thermostat heat, cool, or fan run constantly?
- W
  wrojasAug 11, 2025
  If your White Rodgers Thermostat's heat, cool, or fan runs constantly, it could be due to several reasons: * A short in the wiring may cause this issue. Check each wire connection to ensure they are not shorted or touching each other. * The thermostat itself might have a short. Try resetting the thermostat. * The FAN switch might be set to the 'Fan ON' position. If this is the case, and the system then operates correctly, consider replacing the thermostat.
M
marksgregoryAug 15, 2025
How to adjust temperature display on White Rodgers 1F97-0671 Thermostat?
- S
  Stephanie PottsAug 15, 2025
  If the temperature setting and the thermometer reading on your White Rodgers Thermostat disagree, you can adjust the thermometer setting. The thermometer can be adjusted +/- 4 degrees. Refer to the Temperature Display Adjustment section in the Configuration Menu.
S
smithallisonAug 19, 2025
Why does my White Rodgers 1F97-0671 Thermostat cycle too fast?
- M
  meganrogersAug 19, 2025
  If your furnace or air conditioner cycles too fast or too slow, resulting in a narrow or wide temperature swing, the location of the thermostat and/or the size of the heating system may be influencing the cycle rate. To increase the cycle time, choose SL for slow cycle in the Configuration menu, step 7 (heat) or 8 (cool).
P
Phillip SpencerAug 23, 2025
How to unlock White Rodgers 1F97-0671 Thermostat if I forgot the code?
- M
  meyersthomasAug 23, 2025
  To unlock your White Rodgers Thermostat if you've forgotten the Keypad Lockout Code, press the menu button (the button will disappear) and hold it in for 20 seconds. This action unlocks the thermostat.

White Rodgers 1F97-0671 Specifications

General

Brand	White Rodgers
Model	1F97-0671
Schedule	7-day programmable
Voltage	24 VAC
Weight	0.5 lbs
Display	Digital
Temperature Range	45°F to 90°F (7°C to 32°C)
Power Source	Battery
Stages	2 heating, 2 cooling