White's Spectra V3i - Page 53

pg 55
Complete Guide to Spectra V3
i
®
Key Click – Pressing a control can be indicated by a click or beep. Adjust to preference.
Tone - 59 – 255 – Select the pitch of the key click.
Balance - <-100> - +100 – Balance the key click between left and right head
phone speaker.
Key Limits – When a control reaches the end of it’s available range. If wrap is not
selected, a warning beep indicates no further adjustment range available. Adjust the pitch
of this warning separately.
Tone – Select the pitch of the key limit indication.
Stereo – Select stereo or mono sound for key limits. Stereo = left ear warnings
only. Mono = both ears for warnings key limits (selection at end of it’s range).
Live Search Screen – Select different information to present on the display, search screen
(TRIGGER center), screen (TRIGGER pulled and held), and Analysis screen (TRIGGER forward).
Pinpoint (TRIGGER squeezed and held)
Meter - Graph showing depth or intensity
Screen Top – Show these features on the display.
Depth- Choose a format for the depth indication.
Format – Available formats.
Integer - Choose whole numbers for depth indication.
Decimal - Choose numbers with decimal for depth
indication.
Fraction – Choose number with fraction for depth
indication.
Size – select the size of the depth indication.
(Small, medium, large, or X-large)
Depth – Graph shows target depth.
Signal – Graph shows signal intensity,
Fade Rate - 0 – Off – Rate the depth fades when a metal is no longer near
search coil.
Rule – Show a reference scale at the bottom of depth graph.
Scan – Scrolling graph of target depth over time.
Screen Top – Show depth at top of display.
Depth – Select format for depth indication.
Format – Available formats
Integer - Choose whole numbers.
Decimal - Choose numbers with decimals.
Fraction – Choose number with fractions.
Size – Choose size of the depth indication
(Small, medium, large, or X-large)
Depth – Show depth graphic over time.
Signal – Scrolling graph shows signal intensity.
Scroll Rate - 16 – 30 – Adjust scrolling graph speed / resolution.
Rule – Show a reference scale at the bottom of the graph.
Title – Label frequencies shown on display.
Search – Select features for the search mode, Trigger center position.
Spectragraph – Select features for the Spectragraph.
Screen Top – Show these features on the display.
VDI – Show VDI number above graphic box.
E
E
X
X
P
P
E
E
R
R
T
T
M
M
E
E
N
N
U
U