EasyManua.ls Logo

White's Spectra V3i - Page 54

White's Spectra V3i
62 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
pg 56
Size – Select the size of the VDI number.
(Small, medium, large, or X-large)
Icons – Show an appropriate Icon for each VDI number.
Size Select the size of the Icon.
(Small, medium, large, or X-large)
Depth - Show a depth indication during searching.
Format – Choose a format for the depth indication during
searching.
Integer - Choose whole numbers.
Decimal - Choose numbers with decimal.
Fraction Choose numbers with fraction.
Size – Choose a size for the depth indication.
(Small, medium, large, or X-large)
Consistency – Spectragraph shows consistency of VDI number.
Max - 1 – 50 – Adjust the Spectragraph height (number of speci c VDI
indications to generate the maximum size of the bar.
Intensity – Show the intensity of each VDI number indication.
Base Threshold - 0 – 90 – Bottom of graph is this % of the strongest
signal.
Single Sweep – Every search coil sweep presents new Spectragraph data.
Fade Fade older Spectragraph information.
Fade Rate – How quickly Spectragraph information fades.
Resolution – Number of VDI numbers to each Spectragraph bar, larger numbers
for bigger / wider bars.
Compressed – Reduce the width of bars for VDI numbers less than 0 (Iron range).
Rule – Show a reference bar below Spectragraph.
Disc Bar – Show Discrimination accept / reject at bottom of Spectragaph.
Size – Select the size of the accept / reject bar at bottom of
Spectragraph.
(Small, medium, large, or X-large)
Multigraph – When in multi-frequency, Show three Spectragraphs, one for
each frequency.
Color By Color Spectragraph by;
Icon Ranges – Spectragraph colors based on Icon ranges.
Accept / Reject – Spectragraph colors based on Accept / Reject
settings.
Sizing – Choose sizing option.
Screen Top –Show these features on the display.
VDI – Show VDI number above graphic box.
Con dence – Show a con dence % level with the VDI
number.
Size – Choose the size of the VDI number.
(Small, medium, large, or X-large)
Icons Show Icons after VDI.
Size – Choose the size of the Icons.
(Small, medium, large, or X-large) S
Complete Guide to Spectra V3
i
®

Related product manuals