White 8000 - Changing the Foot

Changing the Foot
Raise the presser foot
lifter
and
set the needle in the
highest
position. Push the lever
of the
holder
toward you to
remove
the foot.
Centre the new
presser foot
under
the shank.
Lower the presser foot lifter
so
that the groove of the holder
fits over the pin of the presser
foot.
If
you fail to catch the
foot, press
the
lever slightly.
The foot holder is removed and
attached
by
loosening or tight
ening the screw with
a
screw
driver.
10