To Next PageTo Next Page
Need help?Do you have a question about the Whyte E-180 S MX and is the answer not in the manual?
General| Brand | Whyte |
|---|---|
| Model | E-180 S MX |
| Category | Bicycle Accessories |
| Language | English |
Refer to component manufacturers for adjustments. Download instructions from internet sites.
Instructions for adjusting the Whyte seat clamp using a 5mm Allen key and torque wrench.
Guide to setting fork sag and rebound damping for optimal performance.
Instructions for setting rear shock sag and rebound damping for correct suspension function.
Table to record suspension settings like rider weight, pressures, and damping.
Detailed steps for removing the rear shock, link, swinging arm, chain stays, and bearings.
Procedures for extracting, inserting, and re-assembling suspension bearings and washers.
Instructions for re-assembling the rear suspension, links, seat-stays, chain-stays, and rear shock.
Instructions for removing and re-assembling the SRAM UDH derailleur hanger.
Guide for installing and removing the Whyte 12mm QR axle and lever.
Detailed steps for replacing outer cables and brake hoses through frame grommets.
Step-by-step guide to removing the Bosch battery, including M10 bolt and bottom cover.
Instructions for correctly re-installing the Bosch battery into the downtube and securing it.
Locating the integrated charge port on the motor mount and how to access it.
