Table of Contents
1.0 Introduction
2.0 Geometry
3.0 Preparations for Riding:
3.1 Making Adjustments
3.2 Whyte Seat Clamp Adjustment
3.3 Set up of Fork
3.4 Set up of Rear Damper
3.5 Suspension Tuning Log
4.0 Safety
5.0 Lubrication
6.0 Servicing the Rear Suspension:
6.1 Removing the Rear Shock, Links and Swinging Arm
6.1.1 Removing the Rear Shock Only
6.1.2 Removing the other Rear Suspension Parts
6.1.3 Removing the Chain-Stay & Bearings from the Main Frame
6.2 Stripping and Re-Assembling Other Bearings
6.2.1 Extraction of Bearings
6.2.2 Insertion of Bearings
6.2.3 Re-Assembly of Shield Washers / Spacers
6.3 Re-Assembling the Rear Suspension
6.3.1 Re-Assembly of the Rear Suspension
6.3.2 Re-Assembly of Chain-Stays & Bearings onto Main Frame
6.3.3 Re-Assembly of Link, Shape-It Link & Seat-Stays onto Main Frame
6.3.4 Re-Assembling of the Rear Shock onto the Main Frame
7.0 Servicing the Dropout System:
7.1 SRAM UDH (Universal Derailleur Hanger) System
7.1.1: Removal of the SRAM UDH
7.1.2: Re-Assembly of the SRAM UDH
7.2 Whyte 12mm QR Shaft
8.0 Internal Cables & Hoses:
8.1 To Replace Cable or Hose Outers
9.0 Removal of Battery
9.1 Battery Removal
9.2 Battery Installation
9.3 Location of Bosch Battery Charge Port
10.0 Torque Settings
11.0 Owner’s Notes
To Next Page
Loading...
