Page 3 2019
Table of Contents
1.0 Introduction
2.0 Geometry
3.0 Preparations for riding:
3.1 Making Adjustments
3.2 Whyte Inter Grip Seat Clamp Adjustment
3.3 Set up of Fork
3.4 Set up of Rear Damper
3.5 Suspension Tuning Log
4.0 Safety.
5.0 Lubrication:
5.1 Whyte Inter Grip Seat Clamp
5.2 General Lubrication
6.0 Servicing the Rear Suspension:
6.1 Removing the Rear Shock and Swinging Arm.
6.1.1 Remove the Rear Shock only.
6.1.2 Remove the other rear suspension parts.
6.1.3 Remove the chain-stay & bearings from the Main Frame
6.2 Stripping and Re-assembling Other Rear Suspension Bearings
6.2.1 Extraction of Bearings
6.2.2 Insertion of Bearings
6.2.3 Re-Assembly of Shield Washers / Spacers
6.3 Re-assembling the Rear Suspension
6.3.1 Re-Assembly of the Rear Suspension.
6.3.2 Insert the bearings into the Main Frame, plus
assemble the chain-stays to the Main Frame.
6.3.3 Re-assemble the other rear suspension parts.
6.3.4 Re-assemble the Rear Shock into the Main Frame.
6.2.4: Application of “SKF LGAF 3E” or “Castrol Optimol T”
Anti-Fret Pastes.
7.0 Servicing the Whyte Modular Dropout Systems:
7.1 Disassembly of Modular Rear Dropouts.
7.1.1 Shimano E-Thru
7.1.2 SRAM Maxle 148mm
7.2 Reassembly of Modular Rear Dropouts.
7.2.1 Shimano E-Thru
7.2.2 SRAM Maxle 148mm
8.0 Servicing the Whyte Inter Grip Seat Clamp
To Next Page
Loading...
