WICKEDedge WE120 - User Manual

Need help?

Do you have a question about the WICKEDedge WE120 and is the answer not in the manual?

Summary

Getting Started Pointers

Drawing and Detecting a Burr

Details the importance of creating a burr for achieving a sharp edge.

Knife Sharpening Safety Precautions

Emphasizes crucial safety measures to prevent injuries during sharpening.

Setting the Knife Sharpening Angle

Making Micro-Adjustments to Angle Settings

Step 1: Loosen L-bracket Knurled Nut

Instructs to loosen the knurled nut on the L-bracket opposite the Ball-Joint.

Step 2: Adjust Ball Joint for Angle

Details using the Vise Key to adjust the Ball Joint for desired angle.

Step 3: Tighten Knurled Nut to Lock Angle

Guides on tightening the Knurled Nut to lock the angle in place.

Correct Knife Positioning

Basic Sharpening Procedure

Sharpening with Coarse Stones

Guides on using coarse stones to re-profile an edge with marker application.

Creating and Detecting a Burr

Fig. 10: Burr Illustration

Diagram illustrating a burr formed on the knife edge.

Process of Creating and Detecting Burr

Explains the process of creating and detecting a burr for sharpness.

Assembling Your Wicked Edge Sharpener

Step 1: Position the Degree Bar

Guides on positioning the Degree Bar on the Base.

Step 2: Fasten the Degree Bar

Step 3: Place the Riser Block

Step 4: Place the Vise

Step 5: Insert 2 inch Socket-Head Cap Screw

Step 5: Attach the Free Vise Jaw

Step 6: Screw the Lower Vise Screw

Step 7: Slide L-bracket Assemblies