15
Placing Flash élan (FL-9é)
on/in the ear
Insert a battery in your hearing aid. First place the hear-
ing aid behind the ear, so that the earhook and tubing
rest comfortably on the ear, close to your head. Then
insert the é-tip in the ear canal while holding the lower
part of the tubing. Lastly, make sure that the anchor is
positioned correctly. It should rest at the opening of
the ear canal and secure the position of the é-tip as well
as the entire élan ear-set. Remember to check at regu-
lar intervals that the hearing aid and the ear-set are po-
sitioned correctly.
To Next Page
Loading...
