Widex M-DEX - Page 101

Electromagneticimmunity
TheM-DEXisintendedforuseintheelectromagneticenvironmentspecified
belowThecustomerortheuserofaM-DEXshouldassurethatitisusedin
suchanenvironment
Immunity Test IEC 60601
Test level
Compliance
level
Electromagnetic
environment –
guidance
Electrostatic
discharge (ESD)
IEC 61000-4-2
± 6 kV contact
± 8 kV air
± 6 kV contact
± 8 kV air
Floors should be
wood, concrete or
ceramic tile. If
floors are covered
with synthetic ma-
terial, the relative
humidity should be
at least 30 %.
Electrical fast
transients/burst
IEC 61000-4-4
± 2 kV for pow-
er line supplies
± 1 kV for input/
output lines
Not
applicable *)
101