Widex M-DEX - Page 111

For transmitters rated at a maximum output power not listed above, the
recommended separation distance d in metres (m) can be estimated us-
ing the equation applicable to the frequency of the transmitter, where P is
the maximum output power rating of the transmitter in watts (W) accord-
ing to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies
NOTE 2 These guidelines may not apply in all situations. Electromagnetic
propagation is affected by absorption and reflection from structures,
objects and people.
ThisM-DEXmaybeinterferedwithbyotherequipmentevenifthatother
equipmentcomplieswithCISPRemissionrequirements
111