TRANSMISSION
With either TV or audio connected
• Press the transmission on/off key on the controller once to
start transmitting from the connected source. An acoustic
signal will sound in your hearing aids, and the transmission LED
will turn green.
• Press the key again once to stop transmission. The hearing aids
will enter the Master program as indicated by a voice message
or beep tones. The green LED will change briefly to red and
then off.
With both TV and audio connected:
• Press the transmission on/off key on the controller once to
start transmission from the TV. An acoustic signal will sound in
your hearing aids, and the transmission LED will turn green.
• Press the key a second time to transmit sound from the audio
source instead. An acoustic signal will sound in your hearing
aids.
25
To Next Page
Loading...
