Why is my Widex Remote Control not working?
Your Widex Remote Control might not be working because of several reasons. First, the remote control battery might be dead or not working, in which case you should change the battery. Second, the hearing aid battery might be exhausted, so try changing that battery. Finally, you might be out of the operating range; try moving within the specified operating range.
General| Type | Remote Control |
|---|---|
| Compatibility | Widex hearing aids |
| Functions | Volume control, Program change |
| Battery type | CR2032 |
| Weight | 30 grams |
| Design | Compact |
Messages indicating adverse reactions, safety hazards, and device performance issues.
Messages indicating information regarding special care to be exercised.
Booklet contains important information and instructions for safe use.
Step-by-step instructions on how to remove the old battery from the remote.
Instructions for inserting a new battery and reassembling the remote.
How to use the volume up and down keys for adjustment.
Instructions on how to toggle between listening programs using the remote.
Warnings about extreme temperatures, humidity, and immersion in water.
Cautions regarding cleaning methods and avoiding dropping the device.
Warnings about radiation (X-rays, MRI, microwave) and potential interference.
Critical warnings about swallowing batteries and keeping them away from children.
Warning about the risk of explosion if the wrong battery type is used or recharged.
Caution regarding potential interference with other equipment, including medical devices.
Solutions for when the remote control does not function, including battery and pairing issues.
Warnings about interference from strong EM fields and recommended separation distances.
Recommendations for hearing aid users with pacemakers to avoid interference.
Details immunity levels for electrostatic discharge.
Details immunity levels for electrical fast transients and bursts.
To Next Page
