If you carry your controller around with you and move outside the
operating range, transmission will be interrupted and your hear-
ing aids will switch to the Master program. The LED will flash at
slow intervals to indicate that transmission has been interrupted.
The change will be indicated by a voice message. If your hearing
aids are set up with beep-tone indication instead, no acoustic
indication will sound.
If you come in range again, the controller will detect the signal
from the TV/Audio and restart transmission. A sound will be
heard in the hearing aids. The LED will light constantly rather than
flash.
Note that the LED may continue to be red if you chose to turn off
the hearing aid microphones during transmission.
27
To Next Page
Loading...
