4.8. Main safety door
The main door protects from the laser radiation, by absorbing the laser radiation.
ATTENTION
The main door should be replaced if it is damaged.
4.9. Positioning the workpiece
Open the main safety door, place the material over the machine table.
If needed, then
Z
as the work
origin.
that is loaded in the system. The system will move displaying the area of material needed for the job processing.
If needed, reposition the laser head by moving it with the arrow keys.
If the material dimensions are not enough, replace the material for another with the proper area to suit the current
job processing.
To Next Page
Loading...