Widinovations Widlaser C500 - 4. Installation and operation; 4.1. Unpacking the machine

widinovations Confidential ©
20|41
V3.3
4. Installation and operation
4.1. Unpacking the machine
Unless agreed otherwise the widlaser C500, is transported in a wood box. Please verify that the wood box has no
damaged parts.
Remove all the screws
on the top panel.
Remove the top panel.
Remove the screws from
the side panels, one by one.
Remove the side
panels, one by one.
Remove all the side panels and then remove the
machine from the pallet with a forklift.