Kunststoffschweißtechnik
Introduction
23.06.15 Working Instructions WIDOS 4600 Page 3 of 44
Purpose of the document
These working instructions give you information about all important questions which refer to
the construction and the safe working of your machine.
Just as we are, you are obliged to engage in these working instructions, as well.
Not only to run your machine economically but also to avoid damages and injuries.
Should questions arise, contact our service teams in the factory or in our subsidiary
companies.
We will help you with pleasure.
According to our interest to continuously improve our products and working instructions,
we kindly ask you to inform us about problems and defects which occur during exercise.
Thank you.
Structure of the working instructions
This manual is arranged in chapters, which belong to the different using phases of the
machine.
Due to this structure, the searched information can be easily found.
¤
WIDOS 23.06.2015
W. Dommer Söhne GmbH
Einsteinstraße 5
D-71254 Ditzingen-Heimerdingen
All rights reserved.
Reprinting only allowed with permission of the corporation.
Any changes prior to technical innovations.
To Next Page
Loading...
