EASYREC 1R-2R ENGLISH
8
1. Introduction to the recovery unit EASYREC 1R-2R
Considering its reduced volume and the extreme facility of transportation, the unit is suited for
interventions on civil conditioners, automotive vehicle conditioners, dispensers, domestic and
commercial refrigerators and dehumidifiers.
The unit is supplied with an oil-less compressor without lubricant.
2. Standard equipment and components description
2.1. RECOVERY COMPRESSOR
The unit model EASYREC 1R-2R is equipped with an oil-less compressor with single piston for
EASYREC 1R and double piston for EASYREC 2R and is suitable for any type of CFC, HCFC, HFC and
HFO refrigerant.
2.2 FILTER
The filter is equipped with two 1/4sae male connections. It is supplied with a hose to make the
connection easier.
2.3 PRESSURE GAUGES
The unit EASYREC 1R- 2R is equipped with two pressure gauges Ø60mm: one pressure gauge on the
suction line and one on the discharge line. They allow to check the pressure during recovery and
refrigerant transfer with the push-pull method.
2.4. DISTILLATION SYSTEM
Unit EASYREC 1R-2R is provided with a distillation system (that can be excluded): it is equipped with an
automatic device for flow regulation and allows the complete separation of the oil (coming from the
system) from the refrigerant.
To Next Page
Loading...