WiiM Pro - How to Set up; Connect the Audio Cable

Connecting to Wi-Fi
White, Green
Flashing (fast)
Connected to network
White
Solid
BT mode, paired
Green
Solid
Aux-in mode
Green
Solid
OTA
White, Green
Flashing (slow)
Restore to factory setting
White, Red
Flashing (slow)
Not connected to network (and not in
setup mode)
Red
Solid
Faulty Error
Red
Flashing (slow)
NOTES:
WGR: Three color LED, no color mix
W: Wi-Fi as the audio source (product default mode)
G: Audio source from Analog, digital audio input or BT
R: Error (Not connected to network or faulty error)
Three modes: Solid, flashing slow, flashing fast
5. HOW TO SET UP
5.1 CONNECT THE AUDIO CABLE
① If you’re connecting to an audio/video receiver (AVR), DAC or amplifier
or
② If you’re connecting to powered speakers or soundbar directly
or
③ If you’re connecting to a TV, vinyl or MP3 player via audio input port then to a
speaker via digital or analog audio output