51WIKA operating instructions, model CPG1200
EN
14603921.02 06/2023 EN/DE
7.6 App “myWIKA device”
Via the “myWIKA device” app and the Bluetooth
®
connection, the
CPG1200 can be configured for calibration and logging tasks in
a convenient way through a mobile device. During the pressure
measurement, the value is displayed in the required unit directly on
the mobile device.
Moreover, further parameters like temperature and pressure
change rate can be monitored. It is also possible to retrieve more
detailed instrument information directly from the WIKA website. In
addition, the app allows configuration, control and saving of logger
processes.
Logs that were stored on the mobile device can be transferred to a PC and be read by
WIKA-Cal. This enables them to be processed further and the app forms the final part of
a complete solution for handling data from the CPG1200.
To connect to a PC and/or an Android/iOS-enabled device, Bluetooth
®
5.2 Low Energy
is recommended.
For iOS-based mobile devices, the app
is available in the Apple Store under the
link below.
For mobile devices with an Android
operating system, the app is available in
the Play Store under the link below.
Download here Download here
7. Operation via menu functions
To Next Page
