WIKA CPG1500 - Page 46

46 WIKA operating instructions, model CPG1500
EN
14161966.06 03/2024 EN/DE
6.4.5 Contrasts
The Contrasts function allows the display's contrast level to be adjusted. You can select
a contrast between 20 % and 80 %.
To change the contrast, proceed as follows under “Menu” / “Basic setting” /
“Contrast”:
1. Use the [LIGHT/▼] button or [ZERO/▲] button to select the desired resolution.
2. Confirm the selection with the [MENU/◀▶] button.
3. Press the [HOME] button in order to exit the menu.
The input can be aborted with the [HOME] button. The instrument exits
the menu and returns to the main display.
The change is directly applied and does not require a restart of the
CPG1500.
6.4.6 Time
The Time is preset at the factory and can be changed if the battery was changed a long
time ago.
To change the time, proceed as follows under “Menu” / “Basic setting” / “Time”:
1. Start by pressing the [MENU/◀▶] button.
⇒
The entry is made from left to right.
2. Use the [LIGHT/▼] button or [ZERO/▲] button to select the number and use the
[MENU/◀▶] button to jump one digit to the right.
⇒
Time format: hh:mm:ss
3. To accept the set time, press the [MENU/◀▶] button repeatedly until the instrument
jumps back one menu level.
4. Press the [HOME] button in order to exit the menu.
The input can be aborted with the [HOME] button. The instrument exits
the menu and returns to the main display.
The change is directly applied and does not require a restart of the
CPG1500.
6. Operation via menu functions