WIKA DG-10-E - General Specifications and CE Conformity; Maintenance and Accessories

11250313.02 GB/D/F/E 06/2008
14
WIKA Operating instructions/Betriebsanleitung/Mode d'emploi/Instrucciones de servicio DG-10
11250313.02 GB/D/F/E 06/2008
15
WIKA Operating instructions/Betriebsanleitung/Mode d'emploi/Instrucciones de servicio DG-10
Specifications Model DG-10
Non-repeatability % of span ≤ 0.1
Long-term stability per year % of span ≤ 0.2
Long-term drift % of span ≤ 0.1
Permissible temperature of
Medium °C -20 ... +85 (up to 0 ... 50 bar)
°C -30 ... +100 (as of 0 ... 100 bar)
Ambience °C -10 ... +60
Storage °C -20 ... +70
Operating temperature range °C 0 ... +60
Temperature coefficients within
compensated temp range
Mean TC of zero % of span ≤ 0.15 / 10 K
Mean TC of range % of span ≤ 0.15 / 10 K
CE-conformitiy
Pressure equipment directive 97/23/EC
EMC directive 89/336/EEC emission (class B) and immunity according to EN 61 326
Rotatability of case ° 300 (with model DG-10-E)
DG-10-S DG-10-E
Principle 7 segment LCD 4 digit 7 segment LCD 4 1/2 digit
14 segment LCD 4 1/2 digit
(2nd display)
Digit size 11 mm 11 mm and 7 mm
Display -1999 ... 9999 -1999 ... 19999
Background illumination --- +
Bar graph with trailing pointer
function
+ +
Min/Max memory + +
Auto On/Off --- 15/30/60/120 min
Specifications Model DG-10
Tara adjustment --- +
Units bar, psi, MPa + +
Password protection --- +
Reset factory setting --- +
Weight g Approx. 400
7. Starting, operation
GB
7. Starting, operation / 8. Maintenance, accessories
GB
Functional test
Open pressure connections only after the system is without pressure!
Observe the ambient and working conditions outlined in section 7
„Technical data.
Please make sure that the digital gauge is only used within the overload
threshold limit at all times!



When touching the digital gauge, keep in mind that the surfaces of the
instrument components might get hot during operation.
When designing your plant, take into account that the stated values (e.g.burst
pressure, over pressure safety) apply depending on the material, thread and sealing
element used.
The displayed measure value must be proportional to the pressure. If not, this might
point to a damage of the sensor diaphragm. In that case refer to chapter 9 „Trouble-
shooting“.
8. Maintenance, accessories
Accessories
For details about the accessories (e. g. protection cap), please refer to WIKA‘s price list,
WIKA‘s product catalog on CD or or contact our sales department.
WIKA digital gauge require no maintenance, except for battery replacement.
Have repairs performed by the manufacturer only.


{ } Items in curved brackets are optional extras for additional price.
Warning
Caution