10 WIKA operating instructions digital pressure gauge, model DG-10
11250313.04 01/2023 EN/DE/FR/ES
EN
3. Safety / 4. Transport, packaging and storage
Explanation of symbols
Before mounting and commissioning the instrument, ensure you read the operating
instructions!
Do not dispose of with household waste. Ensure a proper disposal in accordance with
national regulations.
4. Transport, packaging and storage
4.1 Transport
Check the digital pressure gauge for any damage that may have been caused by transport.
Obvious damage must be reported immediately.
4.2 Packaging
Do not remove packaging until just before mounting.
Keep the packaging as it will provide optimum protection during transport (e.g. change in installation
site, sending for repair).
4.3 Storage
WARNING!
Physical injuries and damage to property and the environment through residual
media
Residual media in the dismounted instrument can result in a risk to persons, the
environment and equipment.
▶
Before storing the digital pressure gauge (following operation), remove any residual
media.
▶
Clean the instrument, see chapter 7.2 “Cleaning”.
To Next Page
Loading...
