WIKA DG-10 User Manual

23WIKA operating instructions digital pressure gauge, model DG-10
EN
11250313.04 01/2023 EN/DE/FR/ES
6. Faults
In the event of any faults, first check whether the digital pressure gauge is mounted correctly,
mechanically and electrically. If complaint is unjustified, the handling costs will be charged.
Faults Causes Measures
No display Batteries discharged Change batteries
Batteries inserted the wrong way
around
Insert the batteries with the polarity
correct
Display remains on 0, despite
there being pressure
Instrument turned too far Replace instrument
Sensor wire broken
Constant display signal upon
change in pressure
Mechanical overload caused by
overpressure
Replace instrument
Signal span too small Mechanical overload caused by
overpressure
Replace instrument
Signal span varies EMC interference sources in the
environment
Remove sources of interference
Operating temperature too high/low Observe the permissible temperatures
Signal span inaccurate Operating temperature too high/low Observe the permissible temperatures
Deviating zero point signal Medium or ambient temperature too
high/low
Observe the permissible temperatures
CAUTION!
Physical injuries and damage to property and the environment
If faults cannot be eliminated by means of the listed measures, the digital pressure gauge
must be taken out of operation immediately.
▶
Ensure that pressure or signal is no longer present and protect against accidental
commissioning.
▶
Contact the manufacturer.
▶
If a return is needed, please follow the instructions given in chapter 8.2 “Return”.
6. Faults

WIKA DG-10 Specifications

General

Brand	WIKA
Model	DG-10
Category	Measuring Instruments
Language	English