WIKA DG-10 - Page 13

13WIKA operating instructions digital pressure gauge, model DG-10
EN
11250313.04 01/2023 EN/DE/FR/ES
Sealing of the process connection
Parallel threads Tapered threads
For sealing the process connections with parallel
threads, use flat gaskets, lens-type sealing rings
or WIKA profile sealings at the sealing face

.
For sealing process connections with tapered
threads, the sealing is made in the threads
using additional sealing material, e.g. PTFE tape
(EN 837-2).
per EN 837 per DIN 3852-E NPT, R and PT


For information on sealings, see WIKA data sheet AC 09.08 or at www.wika.com.
Rotatability of the case
The case of the model DG-10-E can be rotated through 300°, thus the
display can be read from almost any position.
CAUTION!
Damage to the instrument
The instrument may be damaged by improper turning of the
case.
▶
Do not turn the case forcibly past the stop point.
300°
5. Commissioning, operation