Need help?Do you have a question about the Wildgame r12i20 and is the answer not in the manual?
General| Resolution | 12MP |
|---|---|
| Trigger Speed | 0.5 seconds |
| Flash Type | Infrared |
| Video Resolution | 720p |
| Battery Type | AA |
| Number of Batteries | 8 |
| Storage | Up to 32GB SD card |
Instructions for turning the camera unit on.
How to enter and use the camera's test mode.
Explains the camera's power saving features.
Guide for adjusting the camera's time setting.
Steps to set the camera's date.
How to save and name the camera's installation location.
Select the primary image capture trigger mode.
Configure time-lapse capture settings.
Choose between still photos or video capture.
Define when the PIR sensor is active (24 HR, Day, Night).
Adjust PIR sensor's sensitivity to motion.
Configure camera exposure for optimal image clarity.
Set image resolution (High, Medium, Low).
Select image aspect ratio and video resolution.
Set the interval between captured images.
Instructions on how to properly turn off the camera.
Procedure to reset camera settings to factory defaults.
Information on using an external power source.
Details on what information is stamped on images.
To Next Page
