15
5. Press CLOCK/PRESET pad.
6. Turn MENU/TIME to enter 2:30.
7. Press START/QUICK START pad.
Note: Be sure the time of day clock is set at the correct time before programming
PRESET.
Touch CLOCK/PRESET can check the presetting time during the process; press
PAUSE/CANCEL can cancel the preset function.
SPEED DEFROST, AUTO DEFROST cannot be set in PRESET program.
Note: Use preset function with supervision.
Mutli Stage cooking
The oven can be programmed for up to 2 automatic cooking sequences.
The oven has the ability to be programmed to do several consecutive functions.
Suppose you want set the following cooking program:
1st stage: Cook for 5 minutes at 100%;
2nd stage: Cook for 10 minutes at 60%.
Steps:
1. Touch PAUSE/CANCEL pad.
2. Touch POWER LEVEL pad and select power level 100%.
3. Turn the MENU/TIME wheel until cooking time corresponds to 5 minutes.
4. Touch MULTI STAGE COOKING pad.
5. Touch POWER LEVEL pad and select power level 60%.
6. Turn the MENU/TIME wheel until cooking time corresponds to 10 minutes.
7. Touch START/QUICK START pad.
Note: Only MICROWAVE COOKING can be set in multi-stage cooking program.
Auto cook
For food or the following cooking mode, it is not necessary to program the
duration and the cooking power. It is sufficient to indicate the type of food that
you wish to cook as well as the weight of this food. In order to do this, rotate the
MENU/TIME button to select a category of food/cooking mode, and then press
WEIGHT ADJUST to indicate weight of food to be cooked. The oven begins
cooking once the START/QUICK START button is engaged. You may need to turn
food over at the middle of cooking time to obtain uniform cooking. For example:
to cook 400g of fish.
1. Turn MENU/TIME dial until “06” displays.
2. Press WEIGHT ADJUST to indicate a weight of 400 g.
3. Press START/QUICK START button.
WMO-D20L700W_IM.indb 15 07.09.16 15.20
To Next Page
Loading...