1) Min. Blur: Short exposure time to minimize motion blur for better image
quality; shortened IR flash range;
2) Max. Range: Longer exposure time to extend IR flash range for better
night vision; lower image quality;
3) Balanced: combination of above 2 options;
Programmable 1~5 photos per trigger
1280*720, 640*480, 1920*1080,
High, Middle, Low
Higher sensitivity is 1) more sensitive to movements by smaller subjects; 2)
longer detection distance; 3) easier for sensor to detect difference between
body heat and outdoor temperature; 4) easier to trigger camera to record. In
high temperature environment, body heat of subjects and environment
temperature is hard to tell by camera, suggest setting High.
Select “ON”, press “OK”, to set a time interval that you desire between
photos/videos upon motion. This option avoid camera taking too many
photos or videos.
Example: Camera will wait 1 minute between photo/video recordings with
motion if pre-set time interval is 00:01:00
Configurable delay time: 00:00:03~23:59:59.
Note: Pls don’t turn ON Time Lapse and Delay simultaneously!
Select “ON”, press “OK”, to set the interval; PIR sensor of camera will be
turned off; camera will shoot pics or video clips automatically upon the
interval user set.
Configurable interval: 00:00:03~23:59:59.
Note: Pls don’t turn ON Time Lapse and Delay simultaneously!
To Next Page
Loading...